0 Item(s) £0.00 Excl. VAT

View Basket / Checkout

Fluke Ti10 Thermal Imager

Write a Review

The Fluke Ti10 has exactly the same specification as the Fluke Ti9, but with the added advantage of a visible light camera, picture-in-picture mode and full screen IR plus blending.

You Pay: £3,946.00
Inc. Vat: £4,735.20
Reward Points [?]: £78.92

This product is currently unavailable

Contact us to purchase
01642 931329 or contact us

Fluke Ti10 Thermal Imager

Click to enlarge

The Fluke Ti10 ithermal imager is a great problem solving tool for predictive and preventative maintenance. It is excellent for troubleshooting and detecting problems on electrical installations, process, HVAC/R and electro-mechanical equipment. Built for working in tough environments this is a high-performance, entirely radiometric thermal imaging camera.

Digital photo and infrared capabilities

The Fluke Ti10 can capture both a digital photo and an IR photo simultaneously so you can see things in both views in an instant. You get an infrared image and visual (visible light) image from the click of the button. This unique IR-Fusion technology captures both images at the same time and fuses them together to make analysis easy. You are able to transfer information much faster, allowing easy identification of problems in a revolutionary way.

Features of the Fluke Ti10

This unit has a whole host of features and comes with everything you need to get started in thermography including:

  • IR-Fusion Technology to allow enhanced problem detection. Easily scroll through the different view modes to find problem areas. You can choose IR thermal image, picture-in-picture or automatic blends of thermal and visual images.
  • This thermal camera is especially optimised for working in harsh environments and can withstand a drop from 2 meters high (6.5ft). so no need to worry about it getting damaged!
  • It is tested to an IP54 rating withstanding both dust and water.
  • Identify problems fast with the clear, crisp images produced.
  • Excellent thermal sensitivity measuring small temperature changes.
  • The 3 button menu makes it easy to navigate and use.
  • Adjustable hand strap for either left or right handed use.
  • SmartView software
  • Free training DVD. This DVD shows you how to set up your thermal camera. It also tells you how to create reports with the included SmartView software and teaches some thermography theory in a step-by-step guide.

Included Accessories

  • AC power supply/battery charger (including mains adaptors)
  • SD memory card
  • SD card reader (USB) for downloading images into your computer
  • SmartView software with free software upgrades for life
  • Rugged hard carrying case
  • Soft transport bag
  • Hand strap
  • Users manual
  • Warranty registration card

Calibration Certificate Included with this IR Camera.


Need more information? Find it in the full technical specification and reviews.

  • Select Lens

    24° Lens

  • Digital Camera

    As well as a thermal image the Fluke Ti10 Thermal Imager can take a digital image. This helps when creating reports to show exactly where the problem area is and what it looks like.

  • IR Resolution

    The Fluke Ti10 Thermal Imager image resolution is 160 x 120 pixels. Every additional pixel means more valuable temperature information to isolate problem areas

  • Sensitivity

    The Fluke Ti10 Thermal Imager has a thermal sensitivity of 130mK NETD. A lower mK value means a more accurate thermal camera.

  • Software Included

    Software is included for reporting functionality.

  • Temp. Accuracy

    The Fluke Ti10 Thermal Imager can detect between -/+ 2% of the actual temperature.

  • Temperature Range

    This infrared camera has an accuracy of -20°C to +250°C. Electrical use thermal cameras tend to have the widest temperature range as they deal with the highest temperatures.

  • Free Training


Technical Specification



  • Temperature measurement range (not calibrated below -10 °C)  -20 °C to +250 °C (-4 °F to + 482 °F) 
  • Temperature measurement accuracy  ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)

Imaging performance 

  • Field of view  23° x 17° 
  • Spatial resolution (IFOV)  2.5 mRad 
  • Minimum focus distance  Thermal lens: 15 cm (6 in) , Visible (visual) light lens: 46 cm (18 in) 
  • Focus  Manual 
  • Image frequency  9 Hz refresh rate 
  • Detector type  160 X 120 focal plane array, uncooled microbolometer 
  • Infrared lens type  20 mm F = 0.8 lens 
  • Thermal sensitivity (NETD)  ≤ 0.13 °C at 30 °C target temp. (130 mK)
  • Infrared spectral band  7.5 μm to 14 μm 
  • Visual camera  640 x 480 resolution 

Image presentation 

  • Palettes  Ironbow, blue-red, high contrast, grey 
  • Level and span  Smooth auto-scaling and manual scaling of level and span 
  • Minimum span (in manual mode)  5 °C (9 °F) 
  • Minimum span (in auto mode)
  • Fast Auto/Manual Range Toggle Fast Auto Rescale  10 °C (18 °F) 
  • IR-Fusion® information  Full infrared or picture-in-picture 
  • Picture-In-Picture (PIP)  100 % IR displayed in center 320 x 240 pixels 
  • Full screen (PIP off)  100 % IR displayed in center 640 x 480 LCD 
  • Palettes  Ironbow, blue-red, high contrast, grey 

Image capture and data storage 

  • Storage medium  SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each or 3000 basic (.bmp) IR images) 
  • File formats  Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp) files 
  • Export file formats w/SmartView™ software  JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF 

General specifications 

  • Operating temperature  -10 °C to +50 °C (14 °F to 122 °F) 
  • Storage temperature  -20 °C to +50 °C (-4 °F to 122 °F) without batteries 
  • Relative humidity  10 % to 95 % non-condensing 
  • Display  9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) 
  • Controls and adjustments  User selectable temperature scale (°C/°F) Language selection Time/Date set 
  • Software  SmartView® full analysis and reporting software included 
  • Batteries  Internal rechargeable battery pack (included) 
  • Battery life  Three to four hours continuous use (assumes 50 % brightness of LCD) 
  • Battery charge time  Two hours for full charge 
  • AC operation/charging  AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included. 
  • Power saving  Sleep mode activated after five minutes of inactivity, automatic power off after 20 minutes of inactivity 
  • Safety standards  CE Directive: IEC/EN 61010-1 2nd Edition Pollution Degree 2 
  • Electromagnetic compatibility  EMC directive: EN61326-1 C-Tick: IEC/EN 61326 US FCC: CFR 47, Part 15 Class A 
  • Vibration  2 G, IEC 68-2-29 
  • Shock  25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} 
  • Dimensions (HxWxL)  0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) 
  • Weight  1.2 kg (2.65 lb) 
  • IP rating  IP54 
  • Warranty  Two-years 
  • Calibration cycle  Two-years (assumes normal operation and normal aging) 
  • Supported languages  Czech, English, Finnish, French. German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish,Traditional Chinese, Turkish 

Why not leave a review for the Fluke Ti10 Thermal Imager?

Great quality reviews both help out fellow customers and help us to improve the service we give to you, so we'd really appreciate you taking the time to leave your thoughts on this item.

No reviews have been found

Write Your Own Review

You're reviewing: Fluke Ti10 Thermal Imager

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars